Edge Sensors

Deactivate Edge Sensors

Dark-colored carpeting and certain floor patterns may seem like edges to Junior’s edge sensors. If you notice that Junior stops working on your carpet and displays that he feels “something funny going on” with his edge sensors, then you may need to temporarily deactivate them.

Caution: When the edge sensors have been deactivated, Junior will be unable to detect stairs or sharp drops.

To deactivate Bob’s edge sensors:

1. Flip Junior’s power switch ON. Hold down the CHECKUP button on Junior’s cover. The 4 bars at the top of the screen will begin to flash on Junior’s screen.

2. After the 4 bars flash 7 times and remain still, release the CHECKUP button. The 4 bars will remain lit. This means Junior’s edge sensors are deactivated.

Reactivate Edge Sensors

To reactivate Bob’s edge sensors:

1. Hold down the CHECKUP button on Junior’s cover. The 4 bars above it will begin to flash on Junior’s screen.

2. After the 4 bars stop flashing and disappear, release the CHECKUP button. Junior’s edge sensors are active again.